1. Preform conveying structure of automatic high-speed […]
1. Preform conveying structure of automatic high-speed bottle blowing machine: The unique preform mandrel conveying structure ensures that there is no risk of inverting the preform during heating.
2. Full-automatic high-speed bottle blowing machine high-speed operation and clamping structure: the arc of the invention patent with independent intellectual property rights is a clamping structure, a special clamping and pressurizing system, high-speed operation is stable and no noise.
3. Fully automatic high-speed bottle blowing machine hot-filling bottle forming structure: when blowing hot-filling bottles, a three-way circulating special designed distributor is used to evenly distribute the different required water/oil temperatures to different parts of the mold to make the bottle The crystallinity achieves the best effect.
4. Lightweight and energy-saving bottle blowing system: The dual combination of cold air and hot air is used to forcibly cool the bottle mouth and the transmission mandrel during heating to achieve the best cooling method. In the heating box, an air-inducing device is used to overcome air convection, ensure the balance of the heating temperature of the preform, and prevent the surface of the preform from overheating
Reasons for sealing air leakage of automatic bottle blowing machine
1. The pressure of the sealing cylinder of the bottle blowing machine is enough. If the low pressure sealing cylinder is selected, the low pressure can be kept below 8 kg. Normal water bottles are no problem. But it also depends on the high-pressure blowing pressure. If the high-pressure blowing pressure is too high, the sealing cylinder will be pressed down. If the high-pressure pressure is reduced, it can be blown into a bottle. Try to reduce the high-pressure pressure, or if the high-pressure pressure is too high, the clamping pressure If it is too small, it will spread the mold and cause the seal to leak. The automatic clamping pressure can be increased.
2. Whether the sealing glue of the bottle blowing machine is damaged or is aligned with the sealing part, if it deviates from the sealing part, it will leak air.
3. Whether the cylinder block or seal of the sealing cylinder of the bottle blowing machine is damaged. If the seal is damaged, it can be directly reflected by opening the solenoid valve of the sealing cylinder.
4. Whether the solenoid valve of the sealing cylinder of the bottle blowing machine is leaking or stuck or the exhaust is not smooth, these are also the reasons for the leakage of the sealing cylinder.
