PET Blow Moulding Machines are the next part of the entire process of plastic bottle making. They are typically the next step after heat treating and then pressing. They are made to mold plastic bottles from preformed designs or directly out of a CAD drawing. In PET Blow Moulding, Re-heating Stretch...
Preform and its heating, pre-blowing (position, pressure and flow), stretch rod, high-pressure blowing (pressure, position) and mold, etc. These are the factors that affect the bottle blowing machine in the process. 1. Preforms Preforms, also known as parisons, are injection-molded PET pellets. It r...
First. Feeding old card feeding tray: This situation is a headache. From experience, if the length of the preform (preform) is longer and the weight is larger, then this phenomenon is relatively rare. Second. No feeding at the feeding level: Several situations need to be checked: 1. Whether there is...
1 The bottle cannot be taken out of the mold after it is blown. The mold should be opened first, and the mold should be opened and closed manually. If it is normal, run it in the dry running state, if it is also normal. Please check your exhaust time setting. If the exhaust setting is normal and it ...
In addition to the convenient and convenient operation methods in the actual use and operation of the automatic bottle blowing machine, the more important thing is its safety and stability, fully automatic operation, without human intervention, scientific and tight coordination of all parts, blow mo...
